Summer Starts Here - Save up to 70%
Inno Watersport Carriers Review - 2015 Toyota Sienna- Video
Today on our 2015 Toyota Sienna, we're going to take a look at the Inno Boardlocker Board Carrier. That part number is INA744. Now I have one half of it on. I'm going to show you how easy it is to install the other one. All righty. We want to just pretty much try to line it up with the first one. more
1/14/2016 8:45:56 AM
Inno Watersport Carriers Review - 2014 Toyota Corolla- Video
Today in our 2014 Toyota Corolla, we're doing a test fit of the Inno Board locker, board carrier. That part number is INA744. We have one part of it already on our vehicle. We're going to show you how easy it goes on. This pretty much fits any of your car spars, and we're using our NO square car spares toady. What we have here is pretty much take your ... more
1/8/2016 8:18:33 AM
Thule Watersport Carriers Review - 2015 Toyota Sienna- Video
Today on our 2015 Toyota Sienna, we're going to take a look at the THULE Hull-a-Port Pro Kayak Carrier with tie downs, J style. That part number is TH834. I have the kayak on our vehicle, and I have it already strapped down and everything, so we're just going to show you a few features of it. Like I said, we have our straps for the bow and the stern, the one thing I had to do, I had to go ahead and do this one first, I couldn't find anything under the front metal-wise to hook it up, so I have to use one of the tie downs for THULE. This is sold separately, that part number is TH530. All right, now we're just going to show you how we have it all strapped down. Like I said, I had this strapped down in the front. more
12/8/2015 12:10:33 PM
Yakima Watersport Carriers Review - 2006 Toyota Prius- Video
Today on our 2006 Toyota Prius, we will be test fitting the Yakima Sweet Roll Kayak Carrier. That's part number Y04074. I've already got the other three installed on our crossbars, as you can see. That's going to fit your round, square or aero elliptical in most factory rail systems, so it's got a universal stock clamp. We just want to make sure that's opened up all the way. That way it goes around our crossbars, just like that. Then when we've got it in position, you can go ahead and tighten that down. more
4/10/2015 10:41:06 AM
Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2014 Toyota Sienna- Video
Today, on our 2014 Toyota Siena, we're going to be test fitting the Thule SUP Taxi, stand up paddle board carrier with a two-board capacity, part number TH810. With our Thule Rapid Crossroads roof rack system already installed on the Siena, we'll begin our test fit by placing the front hamper of our carrier under our front load bar. We'll bring both of the black rubber coated metal straps on the under side of the load bar and clip the one closest to the front of the carrier. We'll then turn the gray knob locate on the front to secure our strap around our bar. Now, make our way around to the driver side to repeat that same tightening process. With the front half of our carrier secure, we'll now grab the rear half, place it under our rear load bar. Again, we're going to bring those straps around the under side of the load bar then we'll fit the one closest to us under the foot of the carrier. more
6/2/2014 2:16:40 PM
Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2014 Toyota Yaris- Video
Today on our 2014 Toyota Yaris, we're going to be test fitting the Thule SUP taxi, a stand-up paddleboard carrier with a two-board capacity, part number TH810. With our Thule Rapid Traverse roof rack system already installed on the Yaris, we'll begin our test fit by grabbing the front half of our carrier and placing it onto our front load bar. We'll bring the black rubber-coated metal straps around the underside of our load bar, fit both of them into the head of our carrier, and secure it by tightening down the gray knobs. With our front half secure, we'll now grab our rear half. Again, bring the black rubber-coated metal straps around the underside of our load bar. We'll fit just the passenger side into the foot. We'll then take a quick look to be sure we have both halves of our carrier in line with each other. We will then repeat the same tightening process that we used for the front. We're now ready to load up our board. more
5/6/2014 4:14:28 PM
Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2012 Toyota Corolla- Video
Today were working with a 2012 Toyota Corolla and were going to be test fitting the Thule SUP Taxi Standup Paddleboard Carrier. To mount the carrier to our vehicle well take the first half of the carrier and place it up on top of our front load bar. Well feed the speed link straps around, well resecure them to the heads and tighten them down using the gray hand knobs. Next well take the second half of the carrier and place it up on top of our rear bar. We do want to make sure that the rear half lines up nicely with the front half. Again, well feed the straps around, secure them to the head and tighten them down with the knobs. more
8/31/2012 1:39:33 PM
Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2012 Toyota Highlander- Video
Today, we've got a 2012 Toyota Highlander and we're going to be test fitting the Thule SUP Taxi Stand-Up Paddleboard Carrier, part number TH810. To mount our carrier up on top of our roof rack, we'll take the first half of the carrier and set it up on top of our load bar. We'll fit the rubber coated steel speed link straps around our load bar and re-secure them to their heads, tightening them down with the gray hand knobs. With the front half of our carrier secured, we'll take the second half of the carrier and set it up on top of the rear load bar. We do want to make sure that it lines up properly with the carrier in front. Again, we'll feed the speed link straps around the bar and tighten them down with the hand knobs. more
8/10/2012 12:35:25 PM
Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2003 Toyota RAV4- Video
Today on our 2003 Toyota RAV4, were going to be test fitting the Thule SUP Taxi Standup Paddleboard carrier, part number TH810. Our RAV4 is equipped with a factory roof rack, so all we need to do is mount our SUP Taxi up on the factory crossbars. Well take the first half of our carrier and set it up on top of our front crossbar. Well wrap the speed link straps around the crossbar, secure them back to the head of the clamp, and use the wing knobs to tighten it down. Well just take the second half of the carrier, make sure that its lined up with the first and repeat the same tightening procedure. With that, our paddleboard carrier is installed on the roof rack and were ready to load up. more
7/2/2012 9:44:45 AM
Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2008 Toyota RAV4- Video
Today on our 2008 Toyota RAV4, were going to be test fitting the Thule SUP Taxi Standup Paddleboard carrier, part number TH810. To mount the carrier to our vehicle, well take the first half and set it on top of our front crossbar. Well fit the straps around the bar, re-secure them to the head and use the hand knobs to tighten them down. With the front half secure, we can move on to the rear. Well take the second half of the carrier and place it on top of the rear bar. We want to make sure that the second half of the carrier lines up nicely with the first. more
6/29/2012 1:35:44 PM
Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2012 Toyota Sequoia- Video
Today on our 2012 Toyota Sequoia we are going to test fit the Thule SUP, taxi, part number TH810. With the vehicle equipped with the manufacturer's roof rack system and our carrier already pre-assembled we can go ahead and put it directly on the load bars of our roof rack system. For today's application we are going to go ahead and mount it in the center of the vehicle. Using the speed link universal mounting system, we can quickly and easily secure our carrier to the load bars. And there you have it, in just a few simple steps we've gone ahead and secured our carrier to the roof rack system. Now we are ready to hit the road and that does it for our test fit of the Thule Taxi Stand-Up Paddleboard Carrier, part number TH810 on our 2012 Toyota Sequoia.. more
6/13/2012 10:37:24 AM
Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2012 Toyota Camry- Video
Today we have a 2012 Toyota Camry and well be test fitting the Thule SUP Taxi Stand-Up Paddle Board Carrier part number TH810. To fit the carrier on our roof rack, well take the first half, set it on top of our front load bar and well wrap the speed link strap straps around the bar and seat them back in the head. Well then use the hand knobs to tighten it down. Well then move to the rear bar and repeat the same position with the other half of our carrier. Once weve done that, our bike carriers mount into our roof rack and were ready to load it up and hit the road. That does it for out test fit of the Thule SUP Taxi Stand-Up Paddle Board Carrier part number TH810 on our 2012 Toyota Camry.. more
4/5/2012 2:05:19 PM
Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2011 Toyota Corolla- Video
Today on our 2011 Toyota Corolla well be test fitting the Thule SUP taxi stand up paddleboard carrier part #: th810. To begin our test fit well place the front carrier directly over our front crossbar, well bring the rubber coated steel straps underneath the crossbar and secure it back to the taxi. We can then tighten it down using the wing nut and the front of the mount. And with our front carrier secured we can move on to our rear carrier and well repeat the same mounting procedure that we did with the front carrier. And with our rear carrier we do want to make sure to line it up with our front carrier to make loading our SUP much easier. And now that our rear carrier is secured to our vehicle were ready to load our SUP and head on out. more
3/13/2012 4:03:46 PM
Filter Videos
Filter Videos
